Vehicle Notes
Chassis Details
Vehicle Options
- Audio system feature, 2 speakers
- Vehicle Application Truck
- Lighting, interior dome
- Windshield washer bottle access on passenger side dash when passenger-side door is open
- Air conditioning, single-zone manual, integral in-dash mounted
- Brakes, 4-wheel antilock, front disc, rear drum, dual circuit, vacuum assisted hydraulic with EBD (Electronic Brake Distribution). Disc front and self-adjust outboard mounted drum rear. Mechanical, transmission-mounted parking brake. Non-asbestos semi-metallic linings are standard. 4 channel anti-lock brake system.
- Emissions, 50 state certification
- Incomplete vehicle certification
- Steering column, Tilt-Wheel
- Windshield wiper, pulse, wet arm
- Front suspension, 8,440 lbs. (3828 kg) tapered leaf, semi-elliptical steel alloy tapered leaf springs. Includes shock absorbers and stabilizer bar.
- Steering wheel, urethane
- Tires, rear, 225/70R19.5 G 128/126 L BW HWY VAR1
- Drivetrain, rear-wheel drive
- Floor mats
- Wheels, 19.5" x 6", K steel
- Windows, power
- GVWR, 14,500 lbs. (6577 kg)
- Exhaust, single outlet
- Frame, ladder-type channel frame. Full C section straight frame 33.5" (85.1 cm) wide. Yield strength 44,000 psi, section modulus 7.20 cu.in. and RBM 316,800 lb-ft/in per rail.
- Brake, parking, cable actuated, internal expanding drum type, transmission-mounted
- Cup holders
- Fuel tank, 38.6 Gallon, (146L), rectangular fuel tank. mounted between frame rail with electric type fuel pump (mounted in tank). Through the rail fuel fill.
- Front axle, 6,830 lbs. (3098 kg), reverse Elliot "I"-beam includes integral hydraulic power steering. ratio 18.8-20.9:1
- Daytime Running Lamps
- Rear suspension, 12,900 lbs. (5851 kg), multi-leaf, semi-elliptical steel alloy. Includes shock absorbers
- Cruise control, electronic, automatic
- Seat, front high back bucket driver and passenger tricoat cloth covered reclining highback driver seat with single two occupant fold down passenger seat (STD)
- Transmission, 6-speed automatic, 6L90-E Hydra-Matic with lock-up converter and overdrive. Ratios: Gear and Ratios 4.027, 2.364 ,1.532, 1.152, 0.852, 0.667, Rev. 3.064:1 (STD)
- Battery, 750 cold-cranking amps, 12-volt single, maintenance free, frame-mounted battery box
- Air cleaner, heavy-duty, 11" diameter dry paper single element. Air cleaner canister standard with air restriction gauge. Back of cab location.
- Assist steps
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead valve water cooled 6.6L SIDI V8 350 hp [261 kW] @ 4500 rpm, 425 lb.-ft of torque [575.8 N-m] @ 3800 rpm. Electronically controlled direct fuel injection. Six bolt main cap design for heavy-duty performance. Engine Control Module (ECM) and Transmission Control Module (TCM) engine control system. Engine cruise control, engine oil cooler, High Idle Mode (1200 rpm). (STD)
- Seat trim, Cloth
- Storage, door pockets
- Storage, seatback pockets
- Driver Information Center
- Glass, tinted
- Door locks, power
- Tires, front, 225/70R19.5 G 128/126 L BW HWY VAR1
- Axle, 4.30 ratio (Standard on 4500 model only.)
- Wheelbase, 132.5" (336.6 cm)
- Very Dark Pewter, Cloth Seat Trim
- Arc White
- Preferred Equipment Group
- PIO, Audio System, Enhanced audio system
- Transmission, 6-speed automatic, 6L90-E Hydra-Matic with lock-up converter and overdrive.
- PIO, Mirror, outside left hand and right hand heated
- PIO, Rear Vision Camera
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead
- Seat, front high back bucket driver and passenger
- Axle, 4.30 ratio
- PIO, Fire extinguisher and safety reflector mounting provisions
- TIRES, FRONT, 225/70R19.5
- FLT-NAT'L FLEET STOCK PROGRAM
- 50-STATE EMISSION
- 38.6 GALLON FUEL TANK
- FLEET
- View All
Body Details
DuraBox Features
DuraBox Cargo Van is available as either aluminum sheet and post (up to 26’) or FRP (up to 24’). The aluminum design features .040” pre-painted aluminum sheet with galvanized “Z” posts on 16” centers, 2” spacing on seams, and 4” on ribs. Fiberglass Reinforced Plywood (FRP) sidewalls are also available that provide a smooth, clean exterior look that’s great for graphics.
The DuraBox Cargo Van come standard with a 10” aluminum diamond plate radius to protect the front edge from damage and heavy-duty extruded aluminum corners. Rear posts are manufactured with 4” x 5” heavy duty steel that is specifically designed to accommodate tailgate and liftgate installation.
- Features:
- 3” I-Beam crossmember construction, spaced 16”
- 4” I-Beam or channel longsills
- 12 ga galvanneal rear frame construction
- 4” rear post width
- Complete underbody undercoat
- Grab handles passenger and driver side
- 5 5/8” rear header depth
- Marker light eyebrow
- Premium Grade door with 2″ nylon rollers
- 10” aluminum diamond plate front radius
- 5” radius aluminum corner castings
- One piece aluminum roof panels
- Anti-snag roof bows on 24″ centers
- 1/2” AC plywood front wall
- ICC Bumper (Standard)
- Exterior lights meet FMVSS
- Dome light with switch in body
Recently Viewed
You haven’t viewed any vehicles yet.