Upfit Notes

• Toughline steel platform body
• 12'-6" long
• 96" outside width
• 1/8" thick x 6" tall steel perimeter rails.
• Pressure treated hard southern yellow pine flooring ship lapped joints.
• 4" structural steel channel crossmembers under the floor on 16" centers.
• Reinforcing gussets between long beams and the crossmembers on every crossmember.
• Internal stake pockets sized to fit 2 x 4 lumber or our stake racks. Sides and rear.
• 6" tall structural channel long beams. 34" outside width.
• L.E.D. clearance lighting with weather resistant electrical harness.
• Platform body painted black. Sikkens epoxy primer & polyurethane top coat.
• Standard duty 42" tall, drop in steel front bulkhead.
• Drops into the front stake pockets.
• Full width mesh window.
• Reinforcement brace bolted to the front of the bulkhead and welded under the body at the front.
• Powder coated black
• Utilizing existing chassis tail lights
• Heavy duty 4" tubular rear bumper with integrated 2.5" receiver tube.
• Center of receiver to be 20" from the ground. Other heights are available upon request.
• 7 way, RV style, electrical plug wired to OEM brake controller in cab.
• Safety chain rings.
• Mud flaps
• OEM back up camera mounted at rear of body.
• Completed unit to come with 2nd stage MSO.
• 36" long x 18" tall x 18" deep aluminum storage box
• 1/8" thick smooth aluminum
• Continuous type stainless steel hinge with 1/4" diameter pin
• Tubular door seals
• Flush folding "T" handle type latch with seal compression feature
• Single drop down door with key lock
• Chain door supports
• Mounted under the platform on the drivers side forward of the drives axles