Key Features
Body Type
Vehicle Details
Stock Number
LBD16003
Stock Type
New
Year
2027
Body Type
VIN
2SFJL436XV1177920
Seller
Body
Length
192"
Exterior Color
Black
Interior Color
Black

Raskull Supply Co
location_on Seminole, TX
schedule
Listing Notes
SL716-14K
2027 Southland 7' x 16' Heavy-Duty Tandem Axle Dump Trailer
SPECIFICATIONS
• Axles: Two 7,000 lb. Lippert spring axles
• Coupler: 21,000 lb. Demco adjustable coupler
• Jack: 7,000 lb. bolt-on, top-wind jack with pull-pin drop leg
• Frame: 6" x 2" HSS structural tubing
• Floor: 10-gauge steel
• Walls: 12-gauge steel
• Tires/Wheels: 235/80R16 Load Range E tires with steel wheels
• Hoist: 14-ton scissor hoist with 6" bore and 20" stroke
• Hydraulic Operation: Power up / power down
• Dump Angle: 50 degrees
• Tailgate: Steel barn doors with over-center spreader latch
• Ramps: Two galvanized steel ramps, rated at 4,000 lb. midspan each
• Lights: LED
• Electrical Plug: Cold-weather 7-wire RV plug
• Safety Chains: 5/16" chains rated at 16,200 lb. with clevis slip hooks
• Paint: PPG two-part DTM epoxy
STANDARD FEATURES
• Aluminum toolbox
• 110V battery charger
• 10W solar panel
• Corner-mounted D-rings
• Stake pockets
• Spring-latch gate holdbacks
• Fully enclosed wiring
• Rear step
• Engineered sill design
2027 Southland 7' x 16' Heavy-Duty Tandem Axle Dump Trailer
SPECIFICATIONS
• Axles: Two 7,000 lb. Lippert spring axles
• Coupler: 21,000 lb. Demco adjustable coupler
• Jack: 7,000 lb. bolt-on, top-wind jack with pull-pin drop leg
• Frame: 6" x 2" HSS structural tubing
• Floor: 10-gauge steel
• Walls: 12-gauge steel
• Tires/Wheels: 235/80R16 Load Range E tires with steel wheels
• Hoist: 14-ton scissor hoist with 6" bore and 20" stroke
• Hydraulic Operation: Power up / power down
• Dump Angle: 50 degrees
• Tailgate: Steel barn doors with over-center spreader latch
• Ramps: Two galvanized steel ramps, rated at 4,000 lb. midspan each
• Lights: LED
• Electrical Plug: Cold-weather 7-wire RV plug
• Safety Chains: 5/16" chains rated at 16,200 lb. with clevis slip hooks
• Paint: PPG two-part DTM epoxy
STANDARD FEATURES
• Aluminum toolbox
• 110V battery charger
• 10W solar panel
• Corner-mounted D-rings
• Stake pockets
• Spring-latch gate holdbacks
• Fully enclosed wiring
• Rear step
• Engineered sill design
%
/month
Excludes tax, tag and other fees. This estimate is for general information purposes only.
