Upfit Notes

• DESCRIPTION
• DRY FREIGHT VAN BODY 16FT NOMINAL
• 3" I-BEAM CROSSMEMBERS ON 12" CENTERS WITH 6" CHANNEL LONGRAIL
• MYLAR TAPE IS APPLIED BETWEEN ALL STEEL SUBFRAME COMPONENTS AND EXTRUDED ALUMINUM 1 LOWER BOTTOM RAILS TO PREVENT CORROSION
• 1 1/8 IN. LAMINATED HARDWOOD FASTENED TO SUBFRAME. FLOOR BOARDS ARE SHIP LAPPED AND 1 PRE-UNDERCOATED FOR PROTECTION FROM ELEMEN TS.
• UNDERCOATING WATER BASED UNDERCOATING APPLIED TO ROADSIDE AND CURBSIDE EXTERIOR 16 AND INTERIOR OF LONG RAILS AND WHEEL PANS, AS APPLICABLE, EXCLUDING ALL OTHER FLOOR AND SUBFRAME EXTERIOR COMPONENTS
• STEEL GALVANIZED ANGLE FLUSH TO REAR
• MORGAN STANDARD REAR OVERHEAD DOOR
• SPACER KIT FOR REAR DOOR INSTALLATION
• VINYL SEAL KIT WITH MONOBOlTED OVERHEAD DOOR
• HEADER SUB-COMPONENT GALVANNEALED WITH STANDARD LIGHTS
• ENDPLATE SUB-COMPONENT FOR DRY FREIGHT FOR OVERHEAD DOOR V-GROOVE ENDPLATE FOR 1 4.12" AND 4.38" V-GROOVE ENDPLATE FOR QUICK MOUNT LIFTGATE.
• Rear Frame EPlate ENDPLATE REINFORCEMENT GALV Reinforcement
• POST REINFORCEMENT FOR SINGLE LAMP POSTS
• .040 ALUMINUM PREPAINTEO WHITE
• RIVETS FOR FRONT AND SIDEWALLS-16 BODY
• MORGAN STANDARD SIDE WALL WITH LIGHT WEIGHT ALUMINUM HAT POSTS ON 16"CENTERS 1 CURBSIDE
• MORGAN STANDARD SIDE WALL WITH LIGHT WEIGHT ALUMINUM HAT POSTS ON 16"CENTERS 1 ROADSIDE
• LINER-SIDES 3/8" PLYWOOD FULL
• SERIES E-TRACK RECESSED SIDE WALL
• MORGAN STANDARD FRONT WALL WITH LIGHT WEIGHT ALUMINUM HAT POSTS & AERODYNAMIC 1 ALUMINUM RADII
• .040 ALUMINUM PREPAINTED WHITE
• LINER-FRONT 1/2" PLYWOOD FULL
• .032 ONE PIECE ALUMINUM SHEET WITH ANTI-SNAG ROOF BOWS ON 24 IN. CENTERS WITH CROWNED 1 ROOF DESIGN WHICH PREVENTS WATER/ICE POOLING
• AERODYNAMIC ALUMINUM RADIUS ANO POLY-TUFF CORNER CAPS
• ONE INTERIOR LEO DOME LAMP
• TOTAL DOMELIGHT(S) = 1;
• DASH MOUNTED SWITCH IN CAB BY CHASSIS MANUFACTURER
• SWITCH FOR DOMELIGHT CIRCUIT
• DHOLLANDIA RPM25 50X85 2500LB CAPACITY, ALUMINUM PLATFORM, POWER DOWN, VENDER 1 INSTALLED CYCLE COUNTER, GALVANIZED UFTGATE WITH 96" WIDE EXTENSION PLATE WITH 1-STEP BUMPER
• THE LIFTGATE PROMO HAS NOT BEEN SELECTED. IF YOU WISH TO TAKE ADVANTAGE OF THE PROMO, 1 EDIT THE DESIGN AND SELECT THE LIFTGATE PROMO.
• LIFTGATE OPTION MORGAN· LIFTGATE POWER CUT-OFF SWITCH MOUNTED IN CAB DASH
• DHOLLANDIA LICENSE PLATE BRACKET AND LIGHT FOR RPL, RPM, RPH, RMM, AND RMH SERIES 1 UFTGATES
• EXTERIOR LIGHTS TECNIQ S37 LED SEALED CLEARANCE LIGHT, PER FMVSS-108 INSTALLED IN FRONT CORNER CAPS, 1
• SIDE TOP RAILS AND FIVE ACROSS REAR HEADER.
• REAR MAIN HARNESS FOR LED LIGHTS
• CONVERTER FOREIGN CHASSIS WIRING TO DOMESTIC WIRING
• TECNIQ LED REAR LIGHTS RECESSED IN REAR POST/DOMESTIC COMBINED STOP TURN TAIL AND 1 BACKUP LAMP
• REAR FRAME STEEL WHITE, INCLUDES PAINTING REAR ENDPLATE BLACK
• MORGAN LOGO AND SAFETY DECALS-FULL MOUNT
• INSTALL ANJER LOGO DECALS
• ALUMINUM 12" GRAB HANDLE-BOLTED
• GRAB HANDLE MOUNTED ON CURBSIDE AND ROADSIDE REAR CONSPICUITYTAPE INSTALLATION